Filter
Top Products
11
Oven Controls
Setting Temperature display -- Fahrenheit or Celsius
The Broil and Self-Clean keys control the Fahrenheit or Celsius
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or Celsius.
The oven has been preset at the factory to display in Fahrenheit.
Note: both ovens will be changed at the same time.
To change display from Celsius to Fahrenheit or Fahrenheit to
Celsius:
1. Press and hold Broil for about 6 seconds. A beep will sound,
550 will appear BROIL will flash in the display. Continue to
hold key until it beeps and F or C appears in the display.
The F means the oven is set for temperatures in Fahrenheit
and the C showing means the oven is set for temperatures to
display in Celsius.
2. Press Self-Clean and toggle to switch between Fahrenheit or
Celsius modes.
3. Press to accept the change.
Adjusting Oven Temperature
Before adjusting, test a recipe by using a temperature setting
higher or lower than the recommended temperature. The results
will help you to decide how much of an adjustment is needed. If
the oven is cooking too hot or too cool for the temperature you
select, you can adjust the actual oven temperature to be more or
less than what is displayed. The temperature in the oven is pre-
set at the factory to UPO 0.
To adjust the oven temperature higher:
1. Press Bake for 6 seconds. UPO 0 will appear in the display.
2. To increase the temperature use the number keys to enter
the desired change (Example 30°F) 3 0. The temperature
may be increased as much as 35°F (19°C).
3. Press to accept the temperature change and the
display will return to the time of day.
To adjust the oven temperature lower:
1. Press Bake for 6 seconds. UPO 0 will appear in the display.
2. To decrease the temperature use the number keys to enter
the change (Example -30°F) 3 0 and then press Self-Clean.
The temperature may be decreased as much as 35°F (19°C).
3. Press to accept the temperature change and the
display will return to the time of day.
4. Press STOP to reject the change if necessary.
Setting Cook Time
The Bake and Cook Time keys control the Cook Time feature.
The automatic timer of the Cook Time feature will turn the oven
off after cooking for the desired amount of time you selected.
To program the oven to begin baking immediately and to shut
off automatically (example: Bake at 350°F for 30 minutes)
1. Be sure the clock is set for the correct time of day
2. Arrange oven racks and place food in oven.
3. Press Bake.
4. Press . The actual oven temperature will appear in the
display..
5. Press Cook Time. Dashes will appear in the display.
6. Enter desired bake time by pressing 30. Note: Baking time
can be set for any time between 1 minute and 11 hours and
59 minutes
7. Press . The display returns to the time of day (shown
here as 1:30).
To check the bake time remaining, press cook time once and the
time left in the baking process will appear for a few seconds in
the display. A beep will sound once the oven has reached the set
temperature. When the bake time finishes, END and the time of
day will show in the display and the oven turns off automati-
cally. The control will beep 3 times and continue to beep every
30 seconds until is pressed.