Filter
Top Products
Setting Oven Controls
Setting the Clock
Changing between 12 or 24 hour display
Setting the Clock
The CLOCK _Q} pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock has been preset at the factory for the 12 hour operation. When the
range isfirst plugged in, or when the power supply to the range has been interrupted, the timer
in the display will flash the time of day (Fig. 1).
INSTRUCTIONS PRESS
To set the clock (example below for 1:30):
1. Press @. "CLO" will appear in the display (Fig. 2).
2 PressQ @ @ padstosetthet meofdayto1:30/F g3/
"CLO" will appear in the display. Press _. "CLO" will
disappear and the clock will start (Fig. 4).
@
®@@
<@
Fig. 1
DISPLAY
Fig. 2
Changing between 12 or 24 hour time of day display:
1. Press and hold _Q} for 6 seconds (Fig. 3). While holding the
pad down the current time of day will remain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holding the pad
until a beep is heard.
for 6 seconds
Fig. 3
Fig. 4
2. The display will show either "12h"(Fig. 5) or "24h"(Fig. 6).
3. Press c_0,..... to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Fig. 5) or "24h" (Fig.
6).
4. Press _ to accept the desired change or press @ to
reject the change.
5. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from O:00through 23:59 hours.
Fig. 6
Using the Air Guard TM feature
Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active cooking process.
This feature helps remove smoke and eliminates 85% of the odors generated when using your oven.
if you wish to have Air Guard TM clean the oven exhaust once cooking has started, press the @ key.
Note: The Air Guard TM indicator light will glow anytime the Air Guard TM isactive. Air Guard will turn on and cannot be
manually turned off during the Self-cleaning cycle.
13