Kenmore 795.6991 Freezer User Manual


 
REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. All the shelves in this unit
are glass.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier; it will also
reduce the amount of time the refrigerator door is open,
saving energy.
iMPORTANT: Do not clean glass shelves with warm
water when they are cold. Shelves may break ifexposed
to sudden temperature changes or impact, such as
bumping. For your protection, glass shelves are made
with tempered glass, which will shatter into small pebble-
sized pieces.
NOTE: Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjustable Shelves
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf= Tilt the front of the shelf upward
and pull it out.
To replace a shelf =_lt the front of the shelf up and
place the shelf hooks into metal slots at desired position.
Then lower the front of the shelf to secure the hooks
in the slots.
NOTE: Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf falling or
spilling food.
Slide Out Shelves (On Some Models)
You can slide some glass shelves in and out of your
refrigerator as follows.
To slide the shelf out, carefully pull front of shelf
toward you.
, To slide shelf in, push shelf in until it stops.
SNACK DRAWER (On Some Models)
To remove the snack drawer:
Hold drawer by handle, pull forward to drawer stop,
lift up and pull out.
To replace snack drawer, slide back in fully past
the drawer stop.
19