Filter
Top Products
To remove the crisper:
1. Slide crisper straight out to the stop.
2. Lift the front of the crisper, then pull it out to remove.
3. Replace the crisper by sliding it back in fully past the drawer
stop.
To replace lattice on inner surface:
1. For each lattice insert middle tab in 1(closed to glass cover)
and pull sides of the cover to insert lattice.
CRISPER COVER WITH LATTICE ON INNER SURFACE
(on some models)
To remove the crisper cover:
1. Remove both crisper drawers.
2. While holding the crisper cover support (2), pull the cover up
and out(l).
MODULAR DOOR BINS
The door bins are removable for easy cleaning and adjusting.
1. To remove the bin, simply lift the bin up and pull straight out.
2. To replace the bin, slide it in above the desired support
button and push down until it stops.
[] WARNING: Be careful when handing the glass cover since
the glass is not attached to the cover.
To remove the lattice on inner surface:
[] WARNING: Injury could occur if door bins are not firmly
assembled.
NOTE: DO NOT adjust a bin that is loaded with food.
[] CAUTION: DO NOT allow children to play with the baskets.
Sharp corners on baskets could cause injury.
NOTE: Do not change the location of the lower bin in the
upper doors with the others, or the doors will not close
properly.
1. Remove crisper cover (as illustrated above).
2. Hold the glass cover and overturn the crisper cover.
3. For each lattice hold the lattice and pull sides of the cover
outward to remove lattice.
21