Kenmore 795.7202 Refrigerator User Manual


 
SETTING THE CONTROLS
Temperature
The Refrigerator Temp Control ranges from 33°F to
46°F (O°C to 8°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one
increment at a time.
The Freezer Temp Control range is from -6°F to 8°F
(-21°C to -13°C). Pressthe Freezer Temp button to
cycle through the available temperature settings one
increment at a time.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Ultra ice
When you press the Ultra Ice button, the Ultra Ice
graphic will illuminate in the display and will continue
for 24 hours. The function will automatically shut off
after 24 hours.
You can stop this function manually by touching the
button one more time.
This function increases both ice making and freezing
capabilities.
Dispenser
Press the Ice & Water button to select
either Water, Cubed ice or Crushed ice.
The selected option will illuminate.
Some dripping may occur after
dispensing. Hold your cup beneath
the dispenser for a few seconds after
dispensing to catch all of the drops.
NOTE: The dispenser will not work if any
door is left open or if the control lock is
engaged.
CAUTION: The control display is operated
by touch. Excessive moisture on the display
may cause a malfunction. Please keep the
display clean and dry.
Filter Reset
When the water filter indicator turns on, you have to
change the water filter. After changing the water filter,
press and hold the Filter Reset button for three seconds to
turn the indicator light off. You need to change the water
filter approximately every six months.
Dispenser Light
To turn the dispenser light on and off press the
Light button.
Door Alarm
When power is connected to the refrigerator, the door
alarm is initially set to ON. When you press and hold
the Door Alarm button, the display will change to OFF
and the Door Alarm function will deactivate.
When either the refrigerator or the freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.
When you close the door, the door alarm will stop.
Control Lock
When power is initially connected to the refrigerator,
the Control Lock function is off.
if you want to activate the Control Lock function to
lock other buttons, press and hold the Door Alarm
button for approximately three seconds. The Lock (ON)
icon will display and the Control Lock function is now
enabled.
When the Control Lock function is activated, no
other buttons will work. The dispenser pad is also
deactivated.
To disable the Control Lock function, press and hold the
Door Alarm button for approximately three seconds.
18