Kenmore 795.7205 Refrigerator User Manual


 
SETTING THE CONTROLS Temperature
AIRFLOW
Be sure not to block vents while packing your refrigerator.
Doing so will restrict airflow and may cause the
refrigerator temperature to become too warm or cause
interior moisture buildup. (See air flow diagram below.)
The Refrigerator Temp Control ranges from 33°F to
46°F (0°C to 8°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one
increment at a time.
The Freezer Temp Control range is from -6°F to 8°F
(-21°C to -13°C). Press the Freezer Temp button to
cycle through the available temperature settings one
increment at a time.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Dispenser
When you press the Water
button, the Water icon will
illuminate.
When you press the Ice
Select button, either the
cube or crushed ice icon
will illuminate.
Some dripping may occur
after dispensing. Hold your
cup beneath the dispenser
for a few seconds after
dispensing to catch all of
the drops.
NOTE: The dispenser will not work if any door is left open
or if the control lock is engaged.
A CAUTION: The control display is operated by
touch. Excessive moisture on the display may cause a
malfunction. Please keep the display clean and dry.
17