Filter
Top Products
REMOVING,REVERSING AND REPLACING
REFRIGERATOR DOORS (For Freezer Drawer Models)
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Failure to
do so could result in death or serious injury.
Remove food and any Adjustable Door or Utility Bins
from doors. Failure to do so could result in serious
injury.
You may find it more convenient to have the doors
converted from the left-opening type (factory installed)
to the right-opening type. Directions refer to the right
side as the side on your right as you face the unit.
TOOLS NEEDED
• 10ram or 13/32-inch socket wrench
(with 2-inch extension for bottom door hinge)
• No. 2 Phillips head screwdriver
• 1Ainch socket wrench
• Flat-head screwdriver for prying
• Adjustable wrench
Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove.
Fig. 25
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 26
Top Hinge
• Lift up refrigerator door slightly and remove it.
Fig. 27
Middle Hinge
13
Remove Hinge Pin Insert on the right side of the
door and reinstall on left side.
Fig. 28
Hinge Pin
• Turn refrigerator door upside down on a non-scratch
surface.
• Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.
Fig. 29
Hinge Pin
Insert
Hinge Pin
• Remove screw on the opposite side of the door.
This screw is no longer necessary and can be
discarted.
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
Fig.30 Pin Insert I
Hinge Pin
Insert Bracket
Pry off cover on top of refrigerator on left side to
uncover screw holes and place it on the right side.
Fig. 31 Cover
(on top of
refrigerator)