Filter
Top Products
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn off
power at the circuit breaker or fuse box. Failure to do so
could result in death or serious injury.
Remove food and any Adjustable Door or Utility Bins from
doors. Failure to do so could result in serious injury.
Remove washer and set aside.
Using a 1/4 socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Bracket.
Use a 10mm or 13/32 inch socket wrench to remove
the 2 bolts in Middle Hinge Bracket. Remove
screws. Set Middle Hinge Bracket and other parts
aside.
(For Freezer Swing Models)
If entrance is less than 35-inches wide, the refrigerator's
doors will need to be removed.
TOOLS NEEDED:
• 10mm or 13/32-inch socket wrench
(with 2-inch extension for bottom door hinge)
° No. 2 Phillips head screwdriver
• Flat-head screwdriver for prying
• Adjustable wrench
Before removing the doors, remove the Base Grille.
See BASE GRILLE INSTALLATION for reference.
HOW TO REMOVE REFRIGERATOR DOOR
Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove.
J
Fig. 46
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 47
Top Hinge
Pin
• Carefully lift up the freezer door. Remove and place
it on a non-scratching surface.
• Using a 13/32" 10mm socket wrench with a
2" extension, loosen the 2 bolts and remove
Bottom Hinge Bracket from right side.
Bottom Hinge
Fig. 50
Bracket
HOW TO REPLACE REFRIGERATOR AND
FREEZER DOORS
• Reattach Bottom Hinge Bracket using the 2
previously removed bolts.
• Reattach Middle Hinge Bracket with the previously
removed 2 bolts and 2 screws.
Lift up door slightly and remove it. Place door on
a non-scratching surface.
Fig. 48
Middle Hinge
16