Filter
Top Products
4
before plugging in
●
M
ake sure your electricity supply is
t
he same as the one shown on the
underside of the appliance.
Important - UK only
●
T
he wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
●
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
ቢ filler cap
ባ locking lid
ቤ goblet
ብ blender sealing ring
ቦ blender blade unit
ቧ power unit
ቨ speed + pulse control
ቩ cord storage
multi mill (if supplied)
ብ
blender sealing ring
ቦ
blender blade assembly
ቪ multi mill jar
grinding mill (if supplied)
ቫ
mill jar
ቭ grinding mill blade assembly
grating mill (if supplied)
ቮ mill jar
ቯ grating mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring ብ into
the blender blade unit ቦ - ensuring
the seal is located correctly in the
grooved area.
●
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet - ensuring the blade
assembly is fully tightened
ᕡ. Refer
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
ᕢ.
●
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
3