Kenwood BL380 Blender User Manual


 
4
before plugging in
M
ake sure your electricity supply is
t
he same as the one shown on the
underside of the appliance.
Important - UK only
T
he wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
filler cap
locking lid
goblet
blender sealing ring
blender blade unit
power unit
speed + pulse control
cord storage
multi mill (if supplied)
blender sealing ring
blender blade assembly
multi mill jar
grinding mill (if supplied)
mill jar
grinding mill blade assembly
grating mill (if supplied)
mill jar
grating mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet - ensuring the blade
assembly is fully tightened
. Refer
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
.
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
3