Filter
Top Products
Important - UK only
●
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
●
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
ቢ filler cap
ባ locking lid
ቤ goblet
ብ sealing ring
ቦ blade unit
ቧ speed + pulse control
ቨ power unit
ቩ cord storage
mill (if supplied)
ቪ mill jar
ቫ storage lid
to use your blender
1 Fit the sealing ring ብ - ensuring the
seal is fully located under the rim of
the blade unit.
●
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade unit onto the goblet
ᕡ. Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit and turn clockwise to lock
ᕢ.
●
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
hints
●
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep your
hand over the opening. For best
results empty regularly.
●
The processing of spices is not
recommended as they may damage
the plastic parts.
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
●
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
3