Filter
Top Products
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring
ብ - ensuring the
seal is fully located under the rim of
the blade unit.
●
Ensure that the seal is fitted
correctly.
3Turn the blade unit
ቦ upside down.
Lower it into the jar, blades down
ᕣ.
Turn anti-clockwise to lock.
4Place the mill onto the power unit
and turn clockwise to lock
ᕤ.
5 Select a speed or use the pulse
control.
6 After milling, you can replace the
blade unit with the storage lid.
4
recommended speed chart
speed usage/food items max. quantity
1 Frothing milk 1 litre
Light mixes e.g. batters, milkshakes,
scrambled egg 1 litre
2 Soups & drinks 1.6 litres
Thicker mixes e.g. pâtés
Mayonnaise 3 eggs + 450ml
oil
Smoothie drinks
Place the fresh fruit and liquid ingredients in 800ml
first (includes yoghurt, milk and fruit juices) liquid
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Mill - use for dry ingredients only 50g
Herbs, nuts and coffee beans
(P) Operates the motor in a start/stop action. The
pulse pulse will operate for as long as it is held in
position.
Ice crushing - operate the pulse in short bursts 6 cubes
until crushed to the desired consistency.
care and cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Empty the goblet before unscrewing
it from the blade unit.
●
Don’t immerse the blade unit in
water.
●
Do not place any parts in the
dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Don’t immerse the power unit in
water.
●
Push excess cord inside the back of
the power unit.
blade assembly
1 Remove the blade unit from the
goblet or mill by turning to the
unlock position to release.
2 Remove and wash the sealing ring.
3 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
4 Leave to dry upside down.
other parts
Wash by hand, then dry.