Filter
Top Products
slicing/shredding discs
r
eversible slicing/shredding discs - thick ቶ, thin
Use the shredding side for cheese, carrots, potatoes and foods
o
f a similar texture.
U
se the slicing side for cheese, carrots, potatoes, cabbage,
cucumber, courgette, beetroot and onions.
safety
●
Never remove the lid until the cutting disc has
c
ompletely stopped.
●
Handle the cutting discs with care - they are
extremely sharp
to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
2 Holding by the centre grip , place the disc onto the drive shaft
with the appropriate side uppermost .
3 Fit the lid.
4 Choose which size feed tube you want to use. The pusher
contains a smaller feed tube for processing individual items or
thin ingredients.
To use the small feed tube - first put the large pusher inside the
feed tube.
To use the large feed tube - use both pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube.
hints
●
Use fresh ingredients
●
Don’t cut food too small. Fill the width of the large feed tube
fairly full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
●
When slicing or shredding: food placed upright comes out
shorter than food placed horizontally .
●
There will always be a small amount of waste on the plate or in
the bowl after processing.
citrus press (if supplied)
Use the citrus press to squeeze the juice from citrus fruits (eg
oranges, lemons, limes and grapefruits).
ቢ cone
ባ sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power unit.
2 Add the sieve and turn clockwise until the interlock fin on the
sieve aligns with the line on the power unit .
3 Place the cone over the drive shaft turning until it drops all the
way down .
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
●
The citrus press will not operate if the sieve is not
locked correctly.
KENSTORE™ attachments carousel
Y
our food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1
Fit the knife blade to the bowl.
2
Then fit the whisk, discs and canopy into the carousel .
3 Fit the carousel over the knife blade and place the processor lid
o
n top .
care & cleaning
●
A
lways switch off and unplug before cleaning.
●
H
andle the blades and cutting discs with care - they are
extremely sharp.
●
Some foods may discolour the plastic. This is perfectly normal
and won’t harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
●
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
●
Wrap excess cord around the bracket at the back of the
appliance.
liquidiser
1 Empty the jug before unscrewing it from the blade unit.
2 Wash the jug by hand.
3 Remove and wash the sealing ring.
4 Don’t touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
●
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
●
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
all other parts
●
Wash by hand, then dry.
●
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
5