Kenwood FP620 Food Processor User Manual


 
additional attachments
Not all of these attachments listed below will be included with
your food processor. Please refer to your content list supplied. To
b
uy an attachment not included in your pack, contact the dealer
from whom you purchased your appliance.
knife blade
twin beater geared whisk
maxi-blend canopy
thick slicing/coarse shredding disc
k thin slicing/fine shredding disc (FP620 only)
k geared citrus press (if supplied)
k
KENSTORE™ attachments carousel
to use your food processor
When using the food processor bowl, the liquidiser
outlet cover must be fitted and locked in position or
the processor will not work.
1 Fit the bowl. Place the handle towards the back, lower and turn
clockwise until it locks .
2 Then fit the detachable shaft over the power unit fixed shaft.
3 Fit an attachment over the drive shaft.
Always fit the bowl and attachment onto the machine before
adding ingredients.
4 Fit the lid onto the bowl – turn clockwise until the arrow on the
lid aligns with the line on the power unit .
5 Switch on and select a speed.
The processor won’t work if the lid or outlet cover
are fitted incorrectly.
Use the pulse (P) for short bursts. The pulse will operate for as
long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments and
bowl.
Always switch off before removing the lid.
important
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures avoid
contact with the plastic as this may result in permanent marking.
to use your liquidiser
1 Fit the sealing ring into the blade unit - ensuring the seal is
located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Turn the lid in a clockwise direction to lock onto the jug.
6 Lift off the liquidiser outlet cover .
7 Place the liquidiser onto the liquidiser outlet and turn to lock .
important
The liquidiser attachment will work only with the
processor bowl and lid in position.
When using the liquidiser outlet we recommend that
there are no tools in the bowl.
8 Select a speed or use the pulse control.
h
ints
When making mayonnaise, put all the ingredients, except the oil
i
nto the liquidiser. Then with the machine running, pour the oil into
t
he filler cap and let it run through.
Thick mixtures, eg pates and dips, may need scraping down. If
i
t’s difficult to process, add more liquid.
I
ce crushing - operate the pulse in short bursts until crushed to the
desired consistency.
L
iquids should be allowed to cool to room temperature before
b
lending.
To ensure the long life of your liquidiser, never run it for longer
t
han 60 seconds. Switch off as soon as you’ve got the right
c
onsistency.
Don’t process spices - they may damage the plastic.
The machine won’t work if the liquidiser is fitted incorrectly.
Don’t put dry ingredients into the liquidiser before switching on. If
n
ecessary, cut them into pieces; remove the filler cap; then with
the machine running, drop them through one by one.
Don’t use the liquidiser as a storage container. Keep it empty
before and after use.
Never blend more than 1
1
2 litres (2pts 12floz) - less for frothy
liquids like milkshakes.
3
21
22
23