Filter
Top Products
to take your juicer apart
1 Remove the pulp collector by
pressing the pulp collector catch ቯ
a
nd sliding the collector out.
2 Unlatch the lid and lift off.
3
Remove the filter and filter holder
together. Then separate for cleaning.
care and cleaning
●
Before cleaning, unplug your juicer.
●
If the filter is too tight to remove, wait
a few minutes until it loosens up.
●
Some foods, eg carrot, will discolour
the plastic. Rubbing with a cloth
dipped in vegetable oil helps remove
discolouring.
motor unit
●
Wipe with a damp cloth, then dry.
●
Do not immerse in water.
●
Store excess cord in the storage
area at the back of the power
unit
ቱ.
filter
●
Clean using the brush supplied.
Note: Use the flat end of the brush
to remove pulp from the lid.
●
Check the filter regularly for
signs of damage. Do not use if
the filter is damaged. Refer to
“service and customer care”
other parts
●
Wash in hot soapy water, then dry.
●
Alternatively they are dishwasher
safe and can be washed on the top
rack of your dishwasher. Avoid
placing items on the bottom rack
directly over the heating element. A
short low temperature (Maximum
50°C) programme is recommended.
service and customer
care
●
If the cord is damaged it must, for
s
afety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
●
I
f you experience any
problems with the operation
of your juicer, before calling
for assistance refer to the
troubleshooting guide.
If you need help with:
●
using your juicer or
●
servicing or repairs (in or out of
guarantee)
UK only
ట call Kenwood customer care on
023 9239 2333. Have your
model number ready (ie
JE850) and date code (5 digit
code ie 10D13) ready. They are
on the underside of your power unit.
●
spares and attachments
టcall 0870 2413653.
other countries
●
Contact the shop where you bought
your juicer.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
5