Filter
Top Products
U
se the meat grinder to process
meat, poultry and fish. Use the
i
nclusive attachments to shape
s
ausages and kebbe.
before using your Kenwood
appliance
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Always ensure bones and rind etc
are removed from the meat before
mincing.
●
When mincing nuts only feed a few
down at a time and allow the scroll
to pick them up before adding any
more.
●
Always unplug:
●●
before fitting or removing parts
●●
after use
●●
before cleaning.
●
Always use the pusher supplied.
Never put your fingers or utensils in
the feed tube.
●
Warning - the cutting blade is sharp,
handle with care both in use and
cleaning.
●
Ensure the attachment is secured in
position before switching on.
●
To avoid electric shocks, never let
the power unit, cord or plug get wet.
●
Never use a damaged appliance.
Get it checked or repaired: see
‘Service’.
●
Never use an unauthorised
attachment.
●
Never let the cord hang down where
a child could grab it.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
C
hildren should be supervised to
ensure that they do not play with the
a
ppliance.
●
O
nly use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your machine.
important (UK) only
●
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
●
The appliance must be protected by
a 13A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Wash the parts see ‘care and
cleaning’
2 Push excess cord into the cord
stowage compartment at the back
of the power unit.
English
4