Filter
Top Products
19
CARE & CLEANING
1 Turn the oven off and remove the plug from the socket before cleaning.
2 Keep the inside of the oven clean by wiping with a damp cloth. If the oven is heavily
soiled a mild detergent solution may be used. Do not use harsh or aggressive
detergents as this damages the oven. Do not use a knife or any other form of scraper
to remove food residues from this oven.
3 The outside of the oven can be cleaned with a warm damp cloth.
4 Keep the control panel free from too much moisture. Clean it with a soft damp cloth
only and do not use detergents or abrasives.
5 If condensation accumulates inside or around the outside of the oven door, wipe it
clean with a damp cloth. Condensation is quite normal and forms when moisture is
present during cooking.
6 Ensure the door seals and adjacent parts are kept clean by wiping with a damp cloth.
If the door seal is damaged in any way the oven must not be used until it has been
repaired by a Kenwood Authorised Repairer.
7 It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in
warm soapy water, then rinse and dry thoroughly.
8 The roller ring and bottom surface of the oven should be cleaned regularly to avoid
excessive noise. Simply wipe the bottom surface of the oven using a mild detergent
and dry thoroughly with a soft cloth. The roller ring may be washed in mild soapy
water, rinsed and dried thoroughly. Be sure to replace the roller ring in the correct
position.
9 Remove odours from your oven by combining a cup of water with the juice and rind
of a lemon in a deep microwaveable bowl. Microwave for 5 minutes and then wipe
the inside of the oven with a dry cloth.
10 Inspect the oven regularly for signs of corrosion – particularly around the door. If you
find any signs of corrosion, arrange for the appliance to be serviced.