Filter
Top Products
ADJUSTING FOR PROPER FLAME
A. Cooktop burners:
See page 12 – manual burner adjustment on low.
HIDDEN BAKE
Your electric oven features a hidden bake element.
There is no visible element inside the oven; it is located
underneath oven floor. Hidden bake provides even heat
and easier clean-ups.
ELECTRONIC OVEN CONTROL
IMPORTANT INFORMATION
1 Clock must be set before any other operation of the
oven control is possible.
2 Time of day is always displayed in hours:minutes.
3 The maximum programmable time for BAKE, BROIL,
CONVECTION BAKE, CONVECTION BROIL,
TENDERCOOK, COOK TIME AND STOP TIME is
11 hours 59 minutes.
4 When the appliance is connected to a power supply or
after a power interruption of longer than 2 seconds, the
clock and all indicators flash.
5 If more than 10 seconds elapse between selections, the
program will cancel.
6 Functions are identified on the key pad. When a
function such as BAKE, BROIL, CONVECTION
BAKE, CONVECTION BROIL, CONVECTION,
COOK TIME, SELF CLEAN, TIMER or STOP TIME
is touched, setup begins. The function indicator flashes.
When START is touched, the function indicator glows.
The indicator will shut off when STOP is touched or at
the end of the oven function.
7 Functions are activated by the touch of a finger. The
electronic control generates a beep to confirm that your
message has been received.
8 If the control will not function and there is a glowing
indicator light beside the STOP/LOCK function , the
control is locked. Touch and hold STOP/LOCK for 3
seconds to remove the lock. See safety measures.
9 If there has been a power interruption or failure, the
electronic control could either be:
A) “Locked up” (meaning no buttons will function).
Reset the main power breaker to the range.
B) Flashing “88:88”. Reset the clock.
18