Filter
Top Products
Custom door panels, handle
inserts and top grille panels
Door and top gn’lle panels:
Dimensions shown are with routed
edges. Routing is required if panels
are more than l/4” thick.
Freezer door panels
Maximum weight
of cuslom panels
is 30 pounds.
The weight of decorative panels
MUST NOT exceed the weights
specified for each panel. Panels
weighing more than the speci-
fied weights may cause product
damage.
Refrigerator door panel
c--- 22-3/4”-
panel routing for door
and lop grille panels.
1
-D
t
5116”min.
7
I
min. I
Door
Handle
access
panel
If custom door panels
greater than l/4” thick
are used, it may be
necessary to route the
handle side of panel
a minimum of 3-l/4 inches
in from the panel edge
to provide a 2” minimum
access to the door handle.
Either the full length
of the panel or a
selected area(s) can
be rouled. Check with
your builder.
ä
l/4” max.
Maxlmum weight
of custom panel
is 56 pounds.
Top grille panels.
Panel for
6-112 lop
grille” u
Panel for
7-112 lop
grilld’
Maximum weight of custom panel is 10 pounds.
All dimensions +I- l/16” tolerance
Note: If a routed panel is used, add l/16” to
all dimensions shown.
Page 5