Filter
Top Products
12
Custom Side Panels
Side by Side and Bottom Mount Side Panels
Width and height of side panel is determined by installation type.
Side panel should be a minimum of ¹⁄₂ in. (12 mm) thick to prevent
warping. The dimensions shown are actual product dimensions
and may not reflect the needed installation dimensions. Install
side panel (optional) support board on rear wall if opening depth
is 25 in. (63.5 cm) or more.
End View of Side Trim Dimensions:
Inset Side Panel
1. Measure the distance from point A (as shown) to back wall.
Add ⁷⁄₃₂ in. (5.6 mm) to this measurement for side panel to fit
into trim.
2. If panel is more than ¹⁄₄ in. (6 mm) thick, rout front edge of
panel to fit trim piece.
1. Door
Flush Side Panel
1. Measure the distance from point A (as shown) to back wall.
2. Attach support board with screw or adhesive that is
compatible with aluminum and wood.
Recessed Inset Side Panel
1. Measure the distance from point A (as shown) to back wall.
2. Rout front edge of support board or attach ¹⁄₄ in. (6 mm)
board for retention in cabinet side trim.
24
1
/
8
"
(61.3 cm)
23
1
/
2
"
(59.7 cm)
23
11
/
16
"
(60.3 cm)
5
/
32
"
(4 mm)
1
/
4
"
(6 mm)
1
/
16
"
(1.5 mm)
7
/
32
"
(5.5 mm)
13
/
32
" (10 mm)
1. Support board
2. Attachment locations
3. Door
1. Support board
2. Door
1
A
312
A
2
1
A