Filter
Top Products
Combinations -
When installing cooktops, grills and downdraft vents in the same cutout, use the following width dimensions:
Combination
2 cooktops
3 cook-tops
4
cooktops 1 cook-top and
2 cooktops and 3 cooktops and
1 downdraft vent
1 downdraft vent 2 downdraft vents
Cutout Width
23’ min.
35’ min.
47” min.
16-7/a’ min.
29” min.
47’ min.
Combination
Cutout Width
4 cooktops and
3 downdraft vents
65’ min.
1 cooktop, 1 downdraft
vent and 1 grill
31’ min.
2 cook-tops,
2 downdraft vents and
1 grill
49’ min.
All other dimensions remain the same for all cutouts:
Cutout depth: 20-l/2”
Cutout to front of countertop: 1 -l/2”
Cutout to
rear wall:
1"
Cutout to combustible surface: 4”
electric
3"
gas
Special note for installations with gas cooktop:
l If a single downdraft vent is to be installed next to a gas cooktop, the
downdraft vent must use the interior mounted vent motor only.
l If a gas cooktop is to be located between two downdraft vents, an
exterior vent motor and ‘7” adapter kit must be used.
l T’ adapter kits (Black 4175456, White 4319251, Almond 4319252) are
available from your KitchenAid dealer.
1 grill and
2 grills and 3 grills and
1 downdraft vent
1 downdraft vent 2 downdraft vents
1 a-718. 33’ min.
53” min.
min.
I
5