Filter
Top Products
6
Preparing the Food Processor for Use
Before First Use
Before using your Food Processor for the
first time, wash the work bowl, work bowl
cover, feed tube pusher, and blades either
by hand or in the dishwasher (see “Cleaning
the Food Processor” on page 11).
Work Bowl Assembly
1. Place the Food Processor base on a
dry, level countertop with the controls
facing forward. Do not plug in the
Food Processor until it is completely
assembled.
2. With the handle just to the left of
center, place the work bowl on the
base, fitting the center opening over
the power shaft.
3. Grasp the work bowl handle and turn
the bowl to the right until it locks
into position.
4. Insert the mulitpurpose blade or
dough blade into the work bowl.
Place the blade on the power shaft.
Rotate the blade so it falls into place
on the shaft.
5. Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the
feed tube and turn the cover to the
right until it locks into place.
NOTE:
To avoid damage to the work
bowl, do not attach the cover to the work
bowl before the work bowl is locked on
the base.
6. Fit the 2-piece food pusher into the
feed tube.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
|
O
Pulse