Filter
Top Products
English
12
Using the Food Processor
Before Use
Before operating the Food Processor, be
sure the work bowl, blades, and work bowl
cover are properly assembled on the Food
Processor base (see “Preparing the Food
Processor for Use” starting on page 7).
Food Pusher Interlock
The large food pusher is part of the safety
interlock system. The Food Processor will
not run unless the large pusher is inserted
to the maximum fill line on the feed tube.
For continuous operation, insert the
large pusher completely into the ultra
wide mouth feed tube and use the small
food pusher (see page 13 for a complete
description).
Maximum Liquid Level
This line on the work bowl indicates
the maximum level of liquid that can be
processed by the Food Processor.
Turning the Food Processor
“I” and “O”
1. To turn on the Food Processor, press the
“I” Button. The unit will run continuously
and the indicator light will glow.
2. To stop the Food Processor, press the
“O” Button. The indicator light will go
out and an automatic brake will stop
the action of the blade or disk within
seconds.
3. Wait until the blade or disk comes to
a complete stop before removing the
work bowl cover. Be sure to turn off
the Food Processor before removing
the work bowl cover, or before
unplugging the Food Processor.
NOTE: If the Food Processor fails to
operate, make sure the work bowl and
cover are properly locked on the base,
and the food pusher is inserted to the
maximum fill line on the feed tube (see
“Preparing the Food Processor for Use“
starting on page 7).
Rotating Blade Hazard
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in
amputation or cuts.
WARNING
I
O
Pulse
ARTISAN