Filter
Top Products
4
Assembling Your Hand Blender
1. Before using the KitchenAid
™
Hand
Blender for the first time, wipe the
motor body with a clean, damp cloth to
remove any dirt or dust. Mild dish soap
may be used, but do not use abrasive
cleansers.
NOTE: Do not immerse the motor body in
water.
Dry with a soft cloth. Wash the
attachment by hand or in the dishwasher.
Dry thoroughly.
NOTE: Always be sure to unplug the
power cord from the wall socket before
attaching or removing attachment.
2. Remove the attachment by pressing
both ejector buttons on either side of
the body.
3. Read Operating Tips (page 5).
Operating Your Hand Blender
Using the Blending Attachment
1. Insert the blending attachment into the
motor body.
2. Plug the electrical cord into an
electrical wall socket.
3. Adjust the speed by turning the speed
control dial on top of the Hand
Blender.
4. Insert the Hand Blender into the
mixture.
NOTE: Hand Blender should only be
immersed in liquids the length of the
attachment. Do not submerge beyond
the seam of the blending attachment.
Do not immerse the motor body into
liquids or other mixtures.
5. Press the power button to activate the
Hand Blender.
6. When blending is complete, release
the power button before removing
Hand Blender from the mixture.
7. Unplug immediately after use, before
removing attachment.