Filter
Top Products
10
SETTING UP YOUR HAND MIXER
Removing the accessories
2
Insert the accessory shaft with the collar
(D) into the larger opening (B) of the
Hand Mixer. Align the flanges on the
shaft with the slots in the opening. Push
to lock into place.
2
Press the ejector button to release
the accessories from the Hand Mixer,
then remove them.
1
If the Hand Mixer is running, stop the
Hand Mixer by sliding the Power switch
to the “O” (Off) position. Unplug the
Hand Mixer from the electrical outlet.
3
Insert the accessory without a collar (C)
into the smaller opening (A). Align and
push to lock into place.
NOTE: An accessory shaft without a collar
may be used in either opening (A or B). Those
with a collar may only be used in the larger
opening (B).
C
D
D
B
B
A
Paired accessories (Turbo beaters, dough
hooks) include one accessory with a collar
(D), and one without (C). Single accessories
come with a collar (D) (mixing rod) or
without (C) (whisk).
USING YOUR HAND MIXER
W10466753A_ENv7.indd 10 2/22/13 10:03 AM