Filter
Top Products
English
15
TROUBLESHOOTING
Please read the following before calling
your service center.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be able
to comfortably touch the top of the unit.
This is normal.
2. The Stand Mixer may emit a pungent odor,
especially when new. This is common with
electric motors.
3. If the Flat Beater hits the Bowl, stop the
Stand Mixer. See the “Setting Up Your
Stand Mixer” section.
If your Stand Mixer should malfunction
or fail to operate, please check the
following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand Mixer
in working order? If you have a circuit
breaker box, be sure the circuit is closed.
- Turn off the Stand Mixer for 10-15 seconds,
the turn it back on. If the mixer still does
not start, allow it to cool for 30 minutes
before turning it back on.
- If the problem is not due to one of the
above items, see the “Customer service”
section.
W10648168A_ENv03.indd 15 12/11/13 11:48 AM