KitchenAid KBMC147 Microwave Oven User Manual


 
7
Display
When power is first supplied to the microwave oven, the time of
day will flash on the display.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts.
When the microwave oven is not in use, the display shows the
time of day or Timer countdown.
Number Codes
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the code
charts in the Cooking and Custom Reheating sections for
additional information.
Easy Minute, Start
Starting
The EASY MINUTE START pad begins any upper or single
microwave oven function except the Timer. If not touched within
5 minutes after touching a pad, the display will return to the time
of day mode and the programmed function will be canceled.
If cooking is interrupted, touching EASY MINUTE START will
resume the preset cycle.
Adding Minutes
Touching EASY MINUTE START when the microwave oven is off
will start 1 minute of cook time at 100% power.
Touching EASY MINUTE START while the microwave oven is
operating will add cook time at the current cycling power by
1 minute. Multiple minutes can be added by repeatedly touching
EASY MINUTE START.
During Convection Cooking, touching EASY MINUTE START will
not add minutes.
Microwave Oven Cancel
Touching the Microwave Oven Cancel pad cancels any function
except for Timer and Control Lock functions. It will not erase the
time of day.
The microwave oven may also be stopped during a cooking cycle
by opening the door. The cycle can be resumed by closing the
door and touching EASY MINUTE START, or canceled by closing
the door and touching MICROWAVE OVEN CANCEL.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the microwave oven, lower oven and
Timer are off.
1. Touch CLOCK SET/START.
2. Touch the number pads to set the time of day.
3. Touch CLOCK SET/START or EASY MINUTE START.
To Remove:
1. Touch CLOCK SET/START and hold for 5 seconds.
2. To turn clock back on, touch CLOCK SET/START.
Ton es
Tones are audible signals indicating the following:
One tone
Valid pad touch
Function has been entered
Function has been exited
Four tones
End of cooking cycle
End of timer countdown
Reminder tones that sound every minute after a cooking
cycle ends until the door is opened or MICROWAVE OVEN
CANCEL is touched.
Timer
The Timer can be set in minutes and seconds, up to 99 minutes
59 seconds, or in hours and minutes, up to 99 hours 59 minutes,
and counts down the set time. The Timer does not start or stop
the microwave oven.
When the Timer is in use, the microwave oven can still operate.
To Set:
1. Touch TIMER SET START once for minutes and seconds, and
twice for hours and minutes.
If no action is taken after 1 minute, the display will return to
the time of day mode.
2. Touch the number pads to set the length of time.
3. Touch TIMER SET START.
The display will show the time counting down.
When the set time ends, End will appear on the display,
4 end-of-cycle tones will sound, and then reminder tones will
sound every minute.
4. Touch TIMER CANCEL anytime to cancel the Timer.
The time can be reset during the countdown by repeating the
above steps.
Control Lock
The Control Lock shuts down the control panel pads to avoid
unintended use of the microwave oven.
When the control is locked, only the Clock, Timer, and Start pads
will function.
The Control Lock is preset unlocked, but can be locked.
To Lock/Unlock Control: Before locking, make sure the
microwave oven and lower oven are off. Touch and hold
CONTROL LOCK (number pad 3) for 5 seconds until one tone
sounds and CONTROL LOCK and a lock icon (on some
models) appear on the display. Repeat to unlock. CONTROL
LOCK and the lock icon will disappear from the display and a
single tone will sound.