Filter
Top Products
14
Sanitizing the Blender
For sanitizing the blender, use a sanitizing solution with a chlorine
concentration in the range of 100 to 200 parts-per-million. Such a
solution can be made by adding 1 tablespoon of chlorine bleach to
1 gallon of lukewarm water.
1. Wash and rinse the blender jar, and clean the base, before sanitizing.
2. Fill the jar
3
⁄4 full with sanitizing solution (approx. 5 cups). Place the
jar on the blender base and attach the lid.
3. Run the blender for 2 minutes at the High speed setting. (The Bar
Blender runs at the equivalent of High speed in the
“
On” position.)
Remove the blender jar and empty contents. Do not rinse with water.
4. Remove the ingredient cap from the lid. Immerse the lid and cap in
sanitizing solution for 2 minutes.
5. Let jar, ingredient cap, and lid air dry. Do not rinse with water.
6. Unplug the blender before sanitizing the base and cord.
7. Dampen a clean, soft cloth with sanitizing solution, and wipe the
base and cord thoroughly. Let base and cord air dry.
CARE AND CLEANING