Filter
Top Products
9
To Use the InstaWok™ Grate:
1. Check that the control knob is in the OFF position and the
grate is completely cool before handling.
2. Remove grate from cooktop and flip the grate over so that the
wok supports are pointing up.
3. Place the wok grate within the supports.
SealedSurfaceBurners
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner Cap Alignment
Always keep the burner cap properly fitted in place when using a
surface burner. A clean burner cap will help avoid poor ignition
and uneven flames. Always clean the burner cap after a spillover
and routinely remove and clean the caps according to the
“General Cleaning” section.
TripleTier
®
Flame Burner
Standard Burner
Gas tube opening
Gas must flow freely throughout the gas tube opening for the
burner to light properly. Keep this area free of soil and do not
allow spills, food, cleaning agents or any other material to enter
the gas tube opening. Protect it from spillovers by always using a
burner cap.
Burner ports
Check burner flames occasionally for proper size and shape as
shown below. A good flame is blue in color, not yellow. Keep this
area free of soil and do not allow spills, food, cleaning agents or
any other material to enter the burner ports.
TripleTier
®
Flame Burner
Standard Burner
A. Wok supports pointing up
B. Cooktop grate with InstaWok™
Grate insert (left side of range only)
C. Reversible InstaWok™ Grate insert
A. TripleTier
®
flame burner caps
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening
A
B
C
A
B
C
D
E
A. Burner cap
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening
A.
³⁄₄
" (19.1 mm)
B.
³⁄₈
" (9.53 mm)
C. Burner ports
A. 1-1¹⁄₂" (25-38 mm)
B. Burner ports
A
B
D
E
C
BBA
C
B
A