KitchenAid KERC507 Range User Manual


 
16
Test baked goods for doneness a few minutes before the
minimum cooking time with an alternative method such as a
toothpick.
Use a meat thermometer or the temperature probe to
determine the doneness of meats and poultry. Check the
temperature of pork and poultry in two or three places.
Convection Bake
1. Convection element heat and fan
Convection baking can be used for baking delicate cakes and
pastries, as well as foods on multiple racks. It is helpful to
stagger items on the racks to allow a more even flow of heat. If
the oven is full, extra cooking time may be needed.
When cooking an oven meal with several different types of foods,
be sure to select recipes that require similar temperatures.
Cookware should sit in the oven with at least 1 in. (2.5 cm) of
space between the cookware and the sides of the oven.
During convection baking preheat, the convection and broil
elements and the bake element all heat the oven cavity. After
preheat, the convection element and the bake element will cycle
on and off in intervals to maintain oven temperature, while the fan
constantly circulates the hot air.
If the oven door is opened during convection baking or
preheating, the broil and convection element and fan will turn off
immediately. They will come back on once the door is closed.
Reduce recipe temperature 25°F (14°C). The cook time may
need to be reduced also.
To Convection Bake:
Before convection baking,
position racks according to the
“Positioning Racks and Bakeware” section. When using two
racks, place on guides 2 and 4. When using three racks, place on
guides 1, 3 and 5.
1.
Press CONVECTION BAKE.
Press the number pads to enter a temperature other than
325°F (163°C). The convection bake range can be set
between 170°F and 500°F (77°C and 260°C).
2.
Press START.
“Lo°” will appear on the oven display if the actual oven
temperature is under 170°F (77°C).
When the actual oven temperature reaches 170°F (77°C), the
oven display will show the oven temperature increasing in 5°
increments.
When the set temperature is reached, if on, one tone will
sound.
3.
Press CANCEL OFF when finished cooking.
Convection Roast
1. Broil heat
2. Convection fan
3. Bake heat
Convection roasting can be used for roasting meats and poultry,
or for baking yeast breads and loaf cakes using a single rack.
During convection roasting, the bake and broil elements will cycle
on and off in intervals to maintain oven temperature, while the fan
constantly circulates the hot air.
If the oven door is opened during convection roasting, the broil
element and fan will turn off immediately and the bake element
will turn off in 2 minutes. They will come back on once the door is
closed.
Reduce recipe temperature 25°F (14°C). The cook time may
need to be reduced also.
To Convection Roast:
Before convection roasting,
position racks according to the
“Positioning Racks and Bakeware” section. It is not necessary to
wait for the oven to preheat before putting food in, unless
recommended in the recipe.
Use the roasting rack on top of the broiler pan and grid. This
holds the food above the grid and allows air to circulate
completely around all surfaces.
1. Roasting rack
2. Broiler grid
3. Broil pan
1.
Press CONVECTION ROAST.
Press the number pads to enter a temperature other than
300°F (149°C). The convection roast range can be set
between 170°F and 500°F (77°C and 260°C).
2.
Press START.
“Lo°” will appear on the oven display if the actual oven
temperature is under 170°F (77°C).
When the actual oven temperature reaches 170°F (77°C), the
oven display will show the oven temperature increasing in 5°
increments.
When the set temperature is reached, if on, one tone will
sound.
1
2
1
3