11
GLASS TOUCH-ACTIVATED
ELECTRONIC DOUBLE OVEN CONTROL
Electronic Control Pads
When pressing any control pad function on the Electronic Oven
Control, use the pad of your finger to press the desired function.
Hold down the pad a few seconds, or until the desired function
appears in the display.
When entering multiple functions within one setting, pause briefly
between each control pad command. If a command pad is
pressed several times repeatedly, the pad may briefly stop
working. Wait a few seconds, and the pad should function again
as normal.
Display
When the oven is in use, after preheat, the display shows the
oven temperature and time of day. During Timed Cooking, the
display shows a timed countdown.
When power is first supplied to the range, or if a power failure
occurs, “12:00” will appear in the display. See the “Clock”
section to set the time of day.
When the oven is not in use, the display shows the time of day.
Start
The START pad begins any oven function except the Timer,
Control Lock and Sabbath Mode. If not pressed within 5 seconds
after pressing a pad, “Set temp or Push Start” will appear on the
oven display as a reminder. If not pressed within 2 minutes after
pressing a pad, the oven display will return to inactive mode (time
of day) and the programmed function will be canceled.
If a function has been started and a different function is selected,
“Set temp or Push Start” will appear in the display after
5 seconds. If the START pad is not pressed within 2 minutes, the
oven display will return to the active/already started function.
Control Lock
The Control Lock feature shuts down the control panel pads to
avoid unintended use of the oven.
The control cannot be locked if the oven is in use or the oven
temperature is 400°F (205°C) or above. The current time of day
will remain in the display when the control is locked.
The Control Lock is preset unlocked, but can be locked.
When the control is locked, only the TIMER SET/OFF and OVEN
LIGHT pads will function.
To Lock/Unlock Control: Before locking, make sure the oven,
the Timer and Timed Cooking are off. Press and hold the START
pad for 5 seconds until “CONTROL LOCKED” appears on the
display. “Locked” will remain in the display. Repeat to unlock and
remove “LOCKED” from the display.
Off
The OFF pad stops any oven function except for the Warm Zone,
Clock, Timer and Control Lock.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset for the 12-hour format. See
“Clock” in the “Options” section to change the format.
1. Press CLOCK SET/START.
2. Press “3” on the number pad for AM or “6” on the number
pad for PM.
3. Press number pads to set time of day.
4. Press CLOCK SET/START. The time of day is now set.
A.Lower oven convect settings
B.Lower oven settings
C.Upper oven settings
D.Display screen
E.Number keys
F. Start/control lock
G.Upper oven off
H.Lower oven off
I.Options selection pad
J.Clock set/start
K.Self-clean
L.Delay start
M.Cook time (length of cooking time)
N.Warm zone
O.Timer set/off
P. Oven light
A
B
C
D
E
F
G
H
IJ
KLM
N
O
P