Filter
Top Products
7
MICROWAVE OVEN
CONTROL PANEL
Display
When power is first supplied to the microwave oven, a “:” will
blink on the display. Touch CANCEL/OFF to stop the blinking.
Any other time a “:” blinks on the display, a power failure has
occurred. Touch CANCEL/OFF and reset the clock if needed.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts.
If “RETRY” blinks on the display for one second, an invalid pad
was touched. Retry your entry.
When the microwave oven is not in use, the display shows the
time of day or Timer countdown.
Number Codes
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the code
charts in the “Cooking” and “Reheating” sections for additional
information.
Start
The START pad begins any function. If not touched within 5
seconds of touching a pad, the START? indicator light will glow. If
not touched within one minute of touching a pad, the display
returns to the time of day.
If cooking is interrupted during a non-sensor function, the
START? indicator light will glow. Touching START will resume the
cycle.
If cooking is interrupted during a sensor function, the funtion is
cancelled, and cannot be resumed by touching START.
Cancel/Off
The CANCEL/OFF pad clears any incorrect command and
cancels any program during cooking. It will not erase the time of
day.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the non-sensor
cycle.
Clock
This is a 12 hour clock and does not show a.m. or p.m.
To Se t:
Before setting, make sure the microwave oven and Timer are off.
1.
Touch CLOCK SET/START.
2.
Touch the number pads to set the time of day.
3.
Touch CLOCK SET/START or START.
To Re mo ve :
1.
Touch CLOCK SET/START.
2.
Touch 0.
3.
Touch CLOCK SET/START.
The time will disappear and “:” will appear on the display.