Filter
Top Products
7
MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, a “:” will
blink on the display. Touch CANCEL to stop the blinking. If the “:”
blinks on the display at any other time, a power failure has
occurred. Touch CANCEL and reset the clock if needed.
If “RETRY” blinks on the display for 1 second, an invalid value
has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day or Timer
countdown.
Number Codes
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the charts in
the “Cooking” and/or “Reheating” sections for additional
information.
Start
The START pad begins any function. If not touched within
5 seconds of touching a pad, the START? indicator light will glow.
If not touched within 1 minute of touching a pad, the display
returns to the time of day.
If cooking is interrupted during a non-sensor function, the
START? indicator light will glow. Touching START will resume the
cycle.
If cooking is interrupted during a sensor function, the function is
canceled, and cannot be resumed by touching START.
Cancel
The CANCEL pad clears any incorrect command and cancels any
program during cooking. It will not erase the time of day.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the non-sensor
cycle.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
The microwave oven and Timer must be off.
1. Touch CLOCK.
2. Touch the number pads to set the time of day.
3. Touch CLOCK or START.
To Remove:
1. Touch CLOCK.
2. Touch 0.
3. Touch CLOCK.
The time will disappear, and “:” will appear on the display.