Filter
Top Products
4. Replace hood fan unit into oven unit with left corner
side inserted into opening first, right corner next.
Be careful -not to pinch the lead wire between the
back plate and hood fan unit
(Fig. 8).
Figure 8
5. Replace the rear stay.
First, attach rear stay to unit with 2 screws
(Fig. 9).
Make sure the fan blades are visible through the
openings in the rear stay before proceeding.
Safety Screw is located on the rear stay to prevent
improper installation. Do not remove this screw. If
you cannot attach rear stay to the back plate
precisely, the hood fan unit is improperly placed and
the safety screw will not line up.
6. Secure, using remaining 7 screws
(Fig. 10).
The hood fan unit is now rotated for horizontal
exhaust.
Figure 9
Figure 10
7. See page 15 for Backdraft Damper installation.
12