Filter
Top Products
14
4. Place the hopper lid onto
the hopper.
5. Plug into a grounded 3 prong
outlet. The tie provided on the
power cord can be used to bundle
any excess cord.
6. Select the grind by turning the
grind control dial to the desired
setting on the grind level ring. See
the grind setting table on the next
page to match the grind level to
your brewing process. With use,
you’ll be able to refine the settings
to match your own tastes.
NOTE: Because partially ground coffee
beans may remain between the burrs
after the grinder is turned off,
selecting a finer grind may be easier
when the coffee mill is running.
USING THE
PRO LINE
™
SERIES
BURR COFFEE MILL
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire, or electrical shock.