Filter
Top Products
7
Wiring diagrams
Cleaning
Filters:
the filters should be
washed frequently.
Place metal filters in
dishwasher or hot
detergent solution
to clean.
To remove filter:
Use two hands to remove filter.
Push tab back to release the
locking pin, pull down and
forward. Repeat with other
filter(s).
To reinstall filter:
Place back edge of filter into
channel at rear of hood liner.
Push filter up while pushing tab
back. When filter is in place,
release tab. Locking pin will hold
filter in place. Repeat with other
filter(s).
Exterior surfaces:
• Do not use steel wool or soap-
filled scouring pads.
• Rub in direction of the grain line
to avoid marring the surface.
• Always wipe dry to avoid water
marks.
• KitchenAid
®
Professional
Formula Stainless Steel Cleaner
& Polish is the cleaner
recommended for cleaning
stainless steel surfaces on this
product. To order call our
Customer Service Center at
1-800-442-9991 or order on-line at
www.applianceaccessories.com
and ask for part number
8171420. To order from Canada,
call 1-800-807-6777.
• If commercial cleaners are used,
follow label directions. Do not
use products that contain
chlorine (bleach). Chlorine is a
corrosive substance.
For routine cleaning and
fingerprints, use liquid detergent
soap and water, or all-purpose
cleaner. Wipe with damp cloth or
sponge, then rinse with clean
water and wipe dry.
For 36" (91.4) models For 48" (121.9) models