KitchenAid KSCX 3610 Coffeemaker User Manual


 
Building-in
10
approx. 350mm
16
110
1
Lean the bars to the surface of the furniture.
Fix the bars with the screws provided; then
completely extract the two bars.
In case of installation above a "warmer drawer",
use the top of the latter as a reference for the
coffee maker runners. In this case, there will be no
support surface.
3
Fix the power cord with the special clip, to avoid
the cord entangling when extracting or inserting
the appliance. The power cord must be long
enough to allow the extraction of the appliance for
refilling the coffee bean container.
Regulations require that the appliance must be
earthed. The electrical connection must be
made by a qualified electrician in compliance
with the manufacturer’s instructions and
applicable local regulations.
2
Put the appliance on its housing and fasten it with
the screws.
4
To align the appliance correctly, put the spacers
under the bar’s support.
501974402003_UK 8-10-2007 13:47 Pagina 10