KitchenAid KSCX 3610 Coffeemaker User Manual


 
12 Changing and setting the menu parameters
The following menu parameters and functions can be changed by the user:
Clock
Auto-start time
Descaling process
Coffee temperature
Length of time the appliance remains on
Water hardness Factory default values
12.1 Setting the clock
To set the clock, proceed as follows:
Press the (the light over the button comes on) then press the button repeatedly until the
appliance displays
CLOCK 00:00
Press the button to set the clock. (If you hold the , button down, the time is changed
rapidly).
Press the button to confirm the value;
Press the button to exit programming mode or to change other parameters.
When the appliance is in stand-by, you can see the hour by pressing any one of the buttons (except
the ON/OFF button).
12.2 Setting auto-start time
This enables you to set automatic start times.
Make sure the clock on the appliance is set as described above.
Press the button then press the button repeatedly until the appliance displays:
START TIME 00:00
Press the button to set the auto-start time. (If you hold the , button down, the time is
changed rapidly).
Press the button to confirm the value,
Press once and the appliance displays the message:
AUTO-START NO
Press the button to modify the function (the appliance displays AUTO-START YES);
Press the button to activate auto-start;
Press the button to exit programming mode or the button to change other parameters.
12.3 Descaling
Over time, the continuous heating up of the water used to make the coffee leads to lime scale building up
in the inner circuits of the appliance.
When the appliance displays the message:
DESCALE
you should perform the descale cycle.
Proceed as follows:
make sure the appliance is ready.
press the button (the light over the button comes on) then press the button repeatedly
until the appliance displays:
DESCALE NO
Press and the appliance displays the message:
DESCALE YES
Press the button to start the descale programme.
20
501974402003_UK 8-10-2007 13:48 Pagina 20