Filter
Top Products
22
In case of a prolonged power
failure
Surface burners can be manually lighted.
1. Hold a lighted match near a burner and
turn the control knob to HI.
2. After the burner lights, turn the control
knob to the desired setting.
NOTES:
• Be careful when lighting burner.
• Do not leave cooktop unattended when
cooking.
Care
In This Section
Page
Control knobs ...................................23
Tempered glass surface ..................23
Your cooktop is designed for easy care. You
can do most cleaning with items found
around your home. Cleaning your cooktop
whenever spills or soiling occurs helps to
keep it looking and operating like new.
NOTE: Let cooktop cool before cleaning.
place in the wall receptacle. Check for a
tripped circuit breaker or blown fuse.
Check that the control knob is pressed
completely down on valve shaft. If the
spark ignitor still fails to operate, call
your nearest authorized KitchenAid
service company.
Proper grounding and polarity is neces-
sary for correct operation of the electric
ignition system. If the wall receptacle does
not provide correct polarity, the ignitor will
become grounded and click every once in
a while, even after the burner has ignited.
A qualified electrician should check the
wall receptacle to see if it is wired with
correct polarity.
• Do not use this gas sealed burner
cooktop for canning.
Caring for Your Gas Sealed Burner Cooktop
Page
Gas sealed burners ..........................24
Caring for your cooktop....................25
Cleaning chart ...................................26
4454944v11c46 8/25/98 2:58 PM Page 22