Filter
Top Products
4-6
Electrical Shock Hazard
Connect green ground wire to ground
terminal.
Failure to do so can result in death or
electrical shock.
WARNING
8. To remove the cutter grid transformer:
a) Disconnect the white & yellow wires
from the primary terminals, and the
black/white wires from the secondary
terminals.
b) Remove the two mounting screws from
the transformer bracket.
c) Disconnect the green ground wire from
its terminal.
Screw (1 of 2)
Primary Wires
Secondary Wires
Cutter Grid Transformer
Green Ground Wire
NOTE: If the pushbutton switch assembly or
light switch is replaced, the replacement part
and decorative overlay must be ordered using
the model number of the ice maker. The ser-
vice replacement switch is not supplied with a
decorative overlay.
9. To remove the light switch or push-
button switch assembly:
a) Peel off the decorative overlay from the
front of the control housing.
Locking Arm
Four (4) Wires
Locking
Arms
Light Switch
b) Disconnect the wires from the switch
terminals.
c) Press the locking arms and push the
switch assembly out of the housing.
Decorative Overlay
Pushbutton Switch Assembly