Filter
Top Products
Dimensions for built-in area
Personal Injury/Property
Damage Hazard
l
Unit is top-heavy and may tip
forward when the doors are
opened.
l
A solid soffit or 2” wood block is
required above the refrigerator
to prevent tipping during use.
l
If solid soffit is more than 1 inch
above refrigerator, a wood block
must be installed on the wall noi
more than l/4 inch above the
refrigerator cover.
Failure to follow these instructions
could result in personal injury or
property damage.
Width and depth of the built-in area
are determined by the type of
installation. The built-in refrigerator
can be installed with the doors flush
with the wall, with the doors
protruding from the wall, or with side
panels enclosing refrigerator. Select
one method of installation and use
the dimensions given for that
method as shown.
Height of built-in area can range from
a minimum of 82-l/2” to 84-3/4”.
Optional top grilles may be required
for enclosures less than 83-58”.
Height dimensions with optional top
grilles are given on page 4.
+I- 118” tolerance
ii
lrll
irounded electrical
outlet location
Wall
plumbing
location
7yygJ
Floor plumbing
location
Electrical outlet
should be centered
within shaded area.
can be cut anywhere
wilhin shaded areas.
Dimensions for tipping product Dimensions for tipping product
87-l/16”
95-112” 95-112”
Front
Side Side
tipping
tipping tipping
radius
radius radius
c
L L d d
Page 3