Filter
Top Products
6
Cabinet Requirements
*NOTES: Dimension “B” can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than
0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a range hood above the cooktop, follow the range hood instructions for dimensional clearances above the cooktop
surface.
**
NOTE:
If backwall is constructed of a combustible material and a backguard is not installed, a minimum clearance of dimension A + 6"
(15.2 cm) is required for 48" (121.9 cm) cooktops and cooktops with a grill.
A.See chart.
B.See chart.
C.See chart.
D.See chart.
E.See chart.
F. 18" (45.7 cm) min. clearance upper
cabinet to countertop
G.
³⁄₄
" (1.9 cm) back of cabinet cutout to gas
opening cutout
H.
6⁷⁄₈
" (16.1 cm) gas opening cutout depth
I.12½" (31.7 cm) gas opening cutout width
J.22
¹⁄₄
" (56.5 cm) cabinet cutout depth
K.2" (5.1 cm) cabinet side to gas cutout
L.6" (15.2 cm) min. distance on both sides of
the cooktop to the side wall or other
combustible material above cooking surface
M.24" (61.0 cm) cabinet depth
N.7¼" (18.4 cm) cabinet depth to countertop
O.Notch to be equal on both sides
P. 13" (33.0 cm) upper cabinet depth
B min.*
C
A**
D
E
F
I
J
K
M
G
N
O
H
C
E
L
P
L
D
Size Model A**
Cooktop Cutout
to Back Wall
B*
Cooktop to
Cabinet
C
Optional
Backguard and
Upper Cabinet
Opening
D
Cabinet and
Countertop
E
Countertop Only
30" (76.2 cm) KGCU407 1¾" (4.4 cm)** 30" (76.2 cm) 30" (76.2 cm) 29¼" (74.3 cm) 30" (76.2 cm) or
29⁷⁄₈" (75.9 cm) for
zero clearance
36" (91.4 cm) KGCU462
KGCU463
KGCU467
1½" (3.8 cm)**
1¾" (4.4 cm)
1¾" (4.4 cm)
42" (106.7 cm) 36" (91.4 cm) 35¼"
(89.5 cm)
36" (91.4 cm) or
35⁷⁄₈" (91.1 cm) for
zero clearance
48" (121.9 cm) KGCU482
KGCU483
KGCU484
1½" (3.8 cm)**
1¾" (4.4 cm)**
1½" (3.8 cm)**
42" (106.7 cm) 48" (121.9 cm) 47¼" (120.0 cm) 48" (121.9 cm) or
47⁷⁄₈" (121.6 cm) for
zero clearance