Filter
Top Products
9
Changing the Light Bulb
1) Make sure light switch is turned off and range hood is unplugged. CAUTION: Wait until
halogen light is cool to the touch before changing.
2) Gently pull out round metal support from the bottom of the halogen light. The halogen light
should drop out of the light cavity.
3) Gently unplug the defective halogen light and discard. Plug in new halogen light (M16 type,
12V 20 watts max.) and push gently back into light cavity.
4) Replace metal support with prongs against the light.
5) Plug in range hood.
{Fig. 6}
(6a) (6b) (6c)
Screw driver
(6d) (6e)
(12V 20W) stamped
----SAFETY WARNING----
INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES; PLEASE
WEAR PROTECTIVE GLOVES IF THE BOTTOM CASING NEEDS
TO BE REMOVED FOR CLEANING OR SERVICING.