Filter
Top Products
7
Wiring Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED.
MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN IN ACCORDANCE WITH
ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE
CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL TO PREVENT POWER
FROM BEING SWITCHED ON ACCIDENTALLY.
12. Connect the three hood wires to house wires according to color (black to black, white to
white, and green to green) and cap with wire connectors.
13. Test the operation of the hood before moving on to the next step to make sure power is
supplied to the hood.
Duct Cover Installation
NOTE: BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE
HOOD MAY OCCUR.
14. Slide duct cover onto the hood. Refer to Figure 11.
15. Secure duct cover to the body using two ST 3.9 X 10
mm screws (provided). Refer to Figure 12.
Final Assembly
16. Turn power on in control panel. Check light and fan
operation.
17. Make sure to leave this manual for the homeowner.
Figure 11
Figure 12