Filter
Top Products
6
Hood Installation
CAUTION
If moving the cooking range is necessary to install the hood, turn off the power in an
electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS
RANGE.
8. Using references in Table 1 and measurements on
page 12, mark the leveling point for hood-mounting
bracket on the wall.
9. Secure hood-mounting bracket with screws (not
provided). Refer to Figure 8.
10. Align hood to hood-mounting bracket on the wall and
hook hood into place. Refer to Figure 9. CAUTION:
MAKE SURE THE HOOD IS SECURE BEFORE
RELEASING.
Ductwork Installation
11. Use 7” round pipe to connect the plastic exhaust on
the hood to the ductwork above. Use duct tape to
make all joints secure and air tight. Refer to Figure
10.
Figure 8
Figure 9
Figure 10