Filter
Top Products
- 8 -
Without foodstuffs or accessories (Glass plate 3
and grill stand z), switch the appliance on in the
mode Grill:
• Press the button Grill once 0 .
With this you select the Grill operation.
In the display 1 appears the symbol and
the symbol blinks. This indicates readiness
to start.
• Adjust the control dial e to a cooking time of
10 minutes.
• Press the button Start/Quick start e to
start the grilling process.
Note:
On the first usage, the generation of light smoke and
a slight smell can occur, this is due to the production
residues. This is unharmful. Provide for sufficient
ventilation. For example, open a window.
• After 10 minutes, the appliance switches itself
off automatically. Wait until it has cooled down
completely.
• Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.
Inserting accessories
• Place the glass plate 3 centrally on the star-rotator.
The three rollers must be seated on the leading
edge of the glass plate 3.
Operation
Setting the Clock
When you take the microwave oven into use for the
first time, or there has been a power cut, the display 1
indicates "1 : 0 1 ".
1. Press the button Clock 8 . "12 H" appears
in the display 1.Press the button Clock 8
once again should you wish to switch to the 24-
hour mode.
2. By turning the control dial e programme in the
current hour. The clock symbol in the di-
splay 1 blinks.
3. Press the button Clock 8 .
The minute indicator appears.
4. By turning the control dial e, programme in the
current minute.
5. When the correct time is programmed in, press
the button Clock 8 .
The clock symbol in the display 1 glows
continuously and the colon indicates, by blinking,
that the clock is running.
To read off the current time when the microwave oven
is in operation, press the button Clock 8 ; the
time will then be indicated in the display 1 for
approx. 4 seconds.
Setting the kitchen timer
The microwave oven is provided with a kitchen timer
which you can use independently of the microwave
operation.
1. Press the button Kitchen timer r when the
appliance is in standby mode. In the display
appears 1 "00:10".
2. Now set the desired time using the control dial e.
You can select any time range from 10 seconds
to 95 minutes.
3. Press button Start/Quick Start e .
The appliance emits an acoustic signal. The count
down begins. After approx. 3 seconds the current
time is shown once again.