Filter
Top Products
- 6 -
As soon as the added water has left the cooking
bowl 7 by being completely turned to steam, the
rice cooker automatically switches back to the
"keeping warm" mode.
The red control lamp 4 extinguishes and the
yellow control lamp 3 starts to glow again.
The food is now completely steamed and is ready
to eat.
Troubleshooting
Defect Cause Solution
The device
does not
function.
The rice cooker
is not plugged
in.
Push the power
plug into the
wall socket.
The power
socket is
defective.
Use a different
wall power
socket.
The yellow
indicator light
3 switches on,
but the cooking
process cannot
be started.
The cooking
bowl 7 is not
seated correctly
in the rice coo-
ker housing.
Slide the
cooking bowl
lightly to the
right and left so
as to center the
bowl 7 on the
heating plate.
Cleaning and care
Danger! Electric shock!
• ALWAYS remove the plug from the wall socket
before cleaning, and allow the appliance to
cool completely before cleaning and storing it!
• Make certain that no liquid comes into contact
with the heating plate and the insides of the rice
cooker.
• Use a dry cloth to clean the lid 1 and the rice
cooker housing incl. the heating plate. Do not
use harsh cleaners and abrasive materials.
These could damage the upper surfaces.
• Remove the covering of the steam exit opening q
to clean it with a dry cloth. After cleaning,
replace the cover.
• Clean the steaming attachment 9, the cooking
bowl 7, the plastic spoon and the measuring
cup in water containing a mild detergent.
• Dry all parts before using the appliance again.
To clean the inside of the lid 8, it must be dismantled:
1. Pull the inner lid 8 off of the stud.
2. Clean the inner lid 8 with a mild soapy solution
and rinse it with clear water.
3. Replace the inner lid 8 on the stud. Ensure that
the steam exit channel protrudes into the steam
exit opening.
IB_KH1557_E3476_LB4 23.04.2008 16:11 Uhr Seite 6