Filter
Top Products
- 4 -
bifinett KH 2210
• Do not leave a heat generating
appliance unsupervised!
• Do not allow children and elderly
persons handle the appliance
unsupervised as they may not always
be able to rightly estimate the
possible risks.
You can thus prevent the appliance
from being damaged
• Use the kettle º only in the base
station provided for the same ᕧ.
Do not use the base station ᕧ for
any other purposes.
• Do not expose the base station ᕧ
to any liquids and protect it from
splashes.
• Do not separate the kettle º from
the base station ᕧ while the appliance
is in operation. Always switch off the
appliance first.
• An improper use or handling of the
appliance may lead the appliance to
malfunction and cause injuries to the
user.
• No liabilities shall be accepted for
damages caused by improper or
wrong use.
Before the First Use
1. Remove all the packaging material!
2. Clean the kettle º, by pouring water
into it and bringing it to a boil (See
"Boiling water“). Pour out the water
and repeat the process.
Operation
1. Pull the power cord out only as much
as is necessary. Pull it out by opening
the base station ᕧ and connect the
plugs with an appropriate power
socket.
2. Open the lid and fill in with the
desired quantity of water. Please note
the level indicator ᕥ of the appliance.
Fill the kettle º...
- atleast up to the MIN mark, so as not
to overheat the electric water kettle.
– no higher than the MAX mark so
that no boiling water spills out.
3. Close the lid and place the appliance
on the base station ᕧ. The appliance
can only be switched on if it is fixed
to the base station.
4. Keep the On/Off switch ᕤ on
„ “- position. The appliance begins
to operate, the indicator lamp ᕣ
begins to flash.
5. If the water is boiling the appliance
switches off automatically. The On/Off
switch ᕤ automatically moves to the
"O“ position, the indicator lamp ᕣ
turns off.
6. If you want to stop or interrupt the
boiling process, keep the On/Off
switch ᕤ on the "O“ position.
However, you can continue the boiling
process by waiting for 20 seconds until
the heating element has cooled off.
You can then switch on the appliance
once again.
KH2210_IB_UK 11.09.2006 14:58 Uhr Seite 4