Filter
Top Products
- 5 -
bifinett KH 2210
During the cooling phase, do not
press the on/off switch ᕤ, as this
can damage the appliance.
7. With the temperature regulator ᕦ,
you can set the desired water tempera-
ture. In order to bring the water to
a boil, set the temperature regulator
to MAX.
8. While the appliance is not in use,
unplug the power cord from the
socket, so as to prevent the appliance
from an inadvertent start.
Note: The appliance has a safety device.
This switches off the heating element,
if the appliance is switched on when
empty or is cooking dry. In such a condi-
tion, allow the appliance to cool off
completely, before pouring in water
again.
For safety reasons and to avoid injuries
do not open the lid when the water is
boiling or very hot.
Cleaning
Please follow the safety instructions
as well.
Always unplug the power cord from
the socket, before cleaning the base
station ᕧ. Allow the kettle º to cool
down completely.
• Clean the outer side of the kettle and
the base station with a soft, damp
cloth. Do not use any abrasive
materials.
• Decalcify the appliance at regular
intervals. For this use a decalcifying
agent available with specialised
dealers.
Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste
disposal facility.
Warranty & customer service
The warranty conditions and the service
address can be found on the warranty
slip.
Kompernaß GmbH
Burgstrasse 21
D-44867 Bochum
www.kompernass.com
KH2210_IB_UK 11.09.2006 14:58 Uhr Seite 5