Filter
Top Products
GB
6
c) Fixing the kubbe attachment
Once the meat grinder has been
assembled as described under a):
• Turn open the ring clamp ᕦ and ...
• Replace the cutting disc ᕥ with the
two plastic parts of the kubbe
attachment ¸. Fix these as
described in a).
• When everything has been
attached correctly, screw on the
ring clamp ᕦ tightly.
d) Fixing the grater and cutter
attachments
When the meat grinder has been
removed from the motor block:
• First select the appropriate attach-
ment. You can choose from...
- a coarse grater ƹ,
- a fine grater ƺ,
- a cutter attachment ƻ.
• Fix the grater or cutter attachment
in the provided round recesses in
the grater funnel. ¹.
• Place the grater funnel in the motor
block in such a way that the arrow
of the grater funnel points to the
symbol ”open“.
Press in the grater funnel lightly
and turn it upwards till it is in a ver-
tical position.
•To remove once again press in the
grater funnel lightly and turn it in
the direction of the symbol "open“
(Fig. A). Now you can take out the
grater funnel.
e) Fixing the shortbread cookie
attachments
Once the meat grinder has been
assembled as described under a):
•Turn open the ring clamp ᕦ and ...
• take out the cutting disc ᕥ and the
cross blade ᕤ.
• Remove the pattern strips from the
shortbread cookie attachment Ƽ
and ...
• place the shortbread cookie
attachment in the mincer casing
¹.
Insert both the edges of the short-
bread cookie attachment Ƽ into
the slots in the mincer casing ¹.
• When everything has been
attached correctly, screw on the
ring clamp tightly ᕦ and ...
• once again attach the pattern
strips to the front part of the short-
bread cookie attachment.
•To remove you must again remove
the pattern strip first, before turn-
ing open the ring clamp ᕦ and
taking out the shortbread cookie
attachment Ƽ.